What do I need to consider in winter?

1. Drain the supply water pipe

Disconnect the fresh water supply line from the tap or water connection in your vehicle and ensure that the water hose is positioned appropriately (inclined) so that any residual water can flow out of the hose. Afterwards, do not reconnect the hose to the tap, but instead place the open end over a small collecting container.


2. Empty the machine

Turn on the device and add two dry towels to the drum. Then start the drying program (Dry) for 30 minutes. At the beginning of this washing program, the tinyWASH opens the waste water valve and later (approx. 10 minutes after the start of the drying process) the internal water inlet valve, which allows any remaining water from the machine's pipes to drain into the previously emptied water supply hose (1.).

Allow the program to run the full 30 minutes until the end. Then please remove the towels, disconnect the device from the power supply and leave the washing drum flap open to avoid mold formation.


3. Drain the supply water pipe again

Empty the supply and waste water hoses again to remove any water that may have flowed back out of the hose.